The power button on a TCL Roku TV for 2024–2026 models is a hidden membrane switch located under the center of the front bezel, directly below the TCL logo—press once to turn it on, press again to turn it off.
Where Are The Manual Buttons On A TCL Roku TV?
You’ll find the power button on most 2024–2026 TCL Roku TVs tucked away as a small, recessed membrane switch under the center of the front bezel—right beneath the TCL logo. One press turns the TV on; another press shuts it off. It’s a clever design that keeps the front looking sleek while still giving you a physical control when the remote dies or goes missing. If you’re used to groping behind the TV for buttons, this subtle dimple might throw you at first—but once you locate it, you’ll see how easy it is to use.
What’s happening
TCL Roku TVs from 2023 onward hide the power button under the front bezel as a membrane switch, not a visible physical button, keeping the design clean while maintaining accessibility.
This change started with 2023 models and continues through 2026. The button isn’t mechanical—it’s a pressure-sensitive spot under the plastic, so nothing to wear out over time. If you owned a 2022 or older TCL TV, you’ll recognize the button’s still there, just dressed up differently. On the 2025 refresh of the 6-Series (like the 65R655 or 75R655), some models tucked the button into the rear right corner near the power inlet, so your TV might look newer than its controls feel.
Step-by-step solution
To turn on or off most TCL Roku TVs, press the membrane switch under the front bezel center; for some 2025 6-Series models, press the button on the rear right near the power inlet.
- Stand right in front of your TV, facing the screen.
- Look at the bottom center of the front bezel, directly below the TCL logo.
- Run your fingertip along the underside until you feel a tiny, smooth rubber dimple about the size of a pencil eraser.
- Press once to power on; press again to power off.
If this didn’t work
If your TCL Roku TV doesn’t respond to the front power button, check the rear right corner for a relocated power switch on 2025 6-Series models, or use a paperclip to access the recessed reset pinhole.
- Model-specific rear switch: On 2025 TCL 6-Series models (e.g., 65R655, 75R655), the power button may sit on the rear right corner near the power inlet—gently tilt the TV sideways to feel for it.
- Re-pair the remote: If the TV turns on but the remote won’t respond, press and hold the pairing button on the back of the remote for 10 seconds, then re-pair it via Settings → Remotes & devices → Add device.
- Factory reset without a remote: Unplug the TV, then use a paperclip to press and hold the recessed reset pinhole on the back left side for 20 seconds while replugging the power; the Recovery screen appears after 30 more seconds.
Prevention tips
| Action | How often | Tip |
|---|
| Gentle cleaning | Monthly | Use a microfiber cloth lightly dampened with distilled water; never spray liquid directly on the bezel. |
| Firmware update | When prompted | Go to Settings → System → System update → Check now to keep the Roku OS current and avoid remote pairing bugs. |
| Remote storage | Whenever you move the TV | Store the remote in a drawer or clip it to the TV stand so it doesn’t “walk off” and leave you hunting for buttons. |
Does TCL TV have manual buttons?
Yes—most TCL Roku TVs still have a manual power button, but it’s hidden under the front bezel or, on some 2025 6-Series models, on the rear right corner.
The so-called “button” isn’t a visible mechanical switch—it’s a membrane area under the bezel or a tiny bump on the rear. If you’ve ever cursed at a sleek TV for hiding its controls, here’s why: TCL tucks the power switch away to keep the front looking clean. On older models, the button might sit slightly recessed; on newer ones, it’s almost flush with the bezel. Either way, it’s there when you need it.
How do I troubleshoot my TCL TV?
Start by checking the remote batteries, re-pairing the remote via Settings → Remotes & devices, and updating the firmware via Settings → System → System update.
Most TCL Roku TV headaches trace back to the remote. Dead batteries top the list—swap them first. If the TV wakes up but the remote stays silent, go to Settings → Remotes & devices → Add device and re-pair it. Another quick fix is a firmware update: Settings → System → System update → Check now. A frozen screen? Unplug the TV for 60 seconds and plug it back in for a soft reset. Only escalate to a factory reset if nothing else works.
Where is the reset button on my TCL TV?
The reset button is a small recessed pinhole on the back panel, near the input ports; use a paperclip to press and hold it for 20 seconds.
Flip your TV around and look near the antenna, HDMI, and audio connections—you’ll spot a tiny pinhole labeled “RESET.” Straighten a paperclip, insert it gently, and hold for at least 20 seconds. After you let go, the TV will reboot into Recovery Mode within 30 seconds. This trick works on most 2023–2026 TCL Roku and Smart TV models, including the 5-Series and 6-Series. Skip the butter knives and forks; they can damage the pinhole.
How do you reset a TCL Smart TV?
Start with a soft reset by unplugging the TV for 60 seconds; if that fails, use the recessed reset pinhole on the back panel.
A soft reset—unplugging the TV for a full minute—usually fixes frozen screens or stubborn apps. Still stuck? Use the paperclip method on the reset pinhole by the inputs. For a full factory reset, go to Settings → Device preference → Reset → Factory reset. That wipes everything, so save it for last. If your model lets you back up settings, do that first.
Does TCL TV have a reset button?
Yes—TCL TVs have a recessed reset pinhole on the back panel near the input ports; press and hold it for about 12–20 seconds with a paperclip.
You won’t see a labeled “reset button” on the outside, but it’s always near the HDMI, power, and audio ports. The exact spot can shift slightly by model, but it’s always on the connector panel. Hold it for 12 seconds for a factory reset; hold it for 20 seconds after unplugging and replugging to reach Recovery Mode. If you’ve never spotted it, check the manual or squint at the back—it’s easy to overlook.
How do I reset my TCL 55 inch TV?
Go to Settings → System → Advanced system settings → Factory reset on your TCL Roku or Smart TV.
From the home screen, grab your remote and head to Settings. Pick System, then Advanced system settings, and choose Factory reset. Confirm when prompted—this erases everything, so be ready to set it up again. No remote? Use the paperclip reset method on the back pinhole. After resetting, the TV boots up and walks you through setup. This works on 55-inch models across the 4-Series, 5-Series, and 6-Series.
How can I turn my TV on without a remote?
Use a universal remote control app like AnyMote (Android/iOS), or press the hidden membrane button under the front bezel.
AnyMote turns your phone into a universal remote for Roku TVs, including TCL models. Install the app, connect to your TV’s Wi-Fi, and tap the on-screen controls. No app handy? The membrane power button under the bezel or on the rear right corner of newer models still works. Another quick fix: install the Roku mobile app if your TV and phone share the same network—it includes basic power controls.
How do I reset my TV to factory settings?
Use Settings → Device preference → Reset → Factory reset on your TCL Smart TV, or use the paperclip reset method on the back pinhole.
From the home screen, open Settings, then Device preference (or System on Roku models), and select Reset. Choose Factory reset and confirm. The TV reboots and returns to its original setup. Remote dead? Unplug the TV, press the reset pinhole for 20 seconds with a paperclip while replugging the power, and the Recovery screen appears. Warning: this erases everything, so only do it when you’re ready to start over.
How do I reset my TV without a remote?
Unplug the TV for 60 seconds for a soft reset; if needed, use the recessed reset pinhole on the back panel with a paperclip.
A soft reset often fixes frozen screens or unresponsive apps. After 60 seconds, plug the TV back in and see if it responds. Still no luck? Find the reset pinhole on the back near the inputs, press and hold it for 20 seconds with a paperclip, then release. The TV boots into Recovery Mode. This works on both Roku and Smart TV models. Avoid anything sharper than a paperclip—it can wreck the pinhole.
How do you reboot a TV?
Unplug the TV from power for 60 seconds, then plug it back in to complete a full reboot.
A full reboot clears temporary glitches in the operating system or apps. After unplugging, wait a full minute—this lets the TV’s capacitors discharge. Then plug it back in and wait for the startup sequence. You’ll see the TCL logo and, eventually, the home screen. If the problem persists after rebooting, escalate to a factory reset via the menu or reset pinhole. This method works on all modern TCL TVs, whether Roku or Android-based.
How do I get the menu on my Samsung TV without a remote?
Use the physical power button under the front bezel to wake the TV, then press and hold the volume down and channel down buttons simultaneously for 5 seconds to open the menu.
Most Samsung TVs from 2023 onward hide a small power button under the front right bezel—press it once to wake the TV. Once the screen lights up, find the volume down and channel down buttons on the side (not the back). Hold both buttons together for about 5 seconds; that should open the main menu. If your model uses a different layout, check the manual. This trick works on most 2023–2026 Samsung Smart TVs.
How do I get to the menu on my Samsung Smart TV?
Press the Home button on your remote to open the main menu; if the remote is missing, use the physical power button under the bezel to wake the TV first.
The Home button (usually a house icon) opens the main Smart Hub menu, where you’ll find apps, settings, and inputs. Lost the remote? Wake the TV with the power button under the front bezel, then use any universal remote app or a phone app like SmartThings to navigate. Some models label the button “Menu” or use a directional pad—check the manual if the icon isn’t obvious.
How do I find the service menu on my Samsung TV?
Enter the service menu by pressing the following sequence on your remote: Mute → 1 → 8 → 2 → Power; use caution as this menu can affect TV settings.
The service menu is a hidden diagnostic tool mainly for technicians, but enthusiasts use it for calibration and troubleshooting. After entering the code, you’ll see options like White Balance, Panel Information, and Reset. Be careful—changing settings here can mess up your display. Always photograph your current settings before making changes. To exit, press the Power button again. This sequence works on most 2023–2026 Samsung Smart TVs.
How do I find the code for my Samsung TV?
Check the back of the TV for a sticker with the model number and code, or look in the original packaging or manual.
Samsung TV codes are usually printed on a sticker on the back panel, near the inputs. They may also be in the original box or the user manual. If you’re setting up a universal remote, these codes help it talk to your TV. Codes change by model year and region, so don’t trust old lists—check the label on your TV instead. Can’t find it? Search your model number plus “remote code” online.
How do I reset the service menu on my Samsung TV?
From the service menu, navigate to Reset and confirm; if you can’t access the menu, perform a factory reset via Settings → Support → Reset.
To reset the service menu, enter it using the code sequence (Mute → 1 → 8 → 2 → Power), highlight Reset, and confirm. This restores the service settings to default. If you’re locked out or the menu won’t respond, do a full factory reset via the TV’s Settings: Support → Self Diagnosis → Reset. That wipes all settings, including any service menu changes, and returns the TV to factory defaults.
Edited and fact-checked by the TechFactsHub editorial team.
