Keep the remote’s batteries fresh, reset after power surges, and jot down the working code . Swap the batteries every 6–12 months so the signal stays strong and the pairing doesn’t drop. After a power surge or thunderstorm, unplug the TV for 30 seconds, plug it back in, and re-pair the remote. Use...

What Is The Code For A Dynex TV?

The default Dynex TV code is 10171 for most universal remotes; if that fails, try 10463, 10180, 10096, or 10236.

What’s Happening

Universal remotes need a numeric code to recognize and control your Dynex TV, and Dynex uses 5-digit codes assigned by brand and model.

Here’s the thing: when you enter a code, the remote sends a signal that basically says, “I speak Dynex now.” But firmware updates, power surges, or even swapping batteries can wipe that connection out—kind of like when your phone forgets a Bluetooth device after an update. That’s why Dynex often includes a quick-fix code list in the manual or even on a slip of paper tucked inside the box.

Step-by-Step Solution

You program a Dynex TV code by entering 10171, pressing Power, and checking if the TV turns off; if it doesn’t work, move to the next code in the list.

Turn on your Dynex TV and point the universal remote straight at it.
Press and hold the Setup button until the LED on top stays solid—usually takes 3–5 seconds.
Let go of Setup; the light should blink twice to confirm you’re in programming mode.
Type in 10171 using the number pad.
Press Power once. If the TV shuts off, you’ve nailed the code.
Hit Power again to turn the TV back on and test full control.

No luck? Try the next codes in order: 10463, 10180, 10096, and 10236. According to Dynex support docs, these cover most models made from 2018 through 2026.

If This Didn’t Work

Use the Auto Code Search by holding Setup until the light stays on, then mash the Power button until the TV turns off.

Auto Code Search: Point the remote at the TV, press and hold Setup until the LED stays lit, then release it. Now tap the Power button every half-second. When the TV finally turns off, hit Setup right away to lock in the code.
Use the Dynex Remote app (2026): Grab the official Dynex Remote app for iOS or Android. It walks you through pairing and often finds the right code without typing anything.
Manual Entry Mode: Some remotes have a Code Search or Manual option under Setup—pick it and let the remote scan through every Dynex code on its own.

Prevention Tips

Keep the remote’s batteries fresh, reset after power surges, and jot down the working code.

Swap the batteries every 6–12 months so the signal stays strong and the pairing doesn’t drop.
After a power surge or thunderstorm, unplug the TV for 30 seconds, plug it back in, and re-pair the remote.
Use a fine-tip permanent marker to scribble the code on the back of the remote—no more hunting for it later.
Check the quick-start guide for any Dynex models released after 2024; older code lists might miss the newest firmware tweaks.

How do I sync my remote to my Dynex TV?

Enter code 10171, press Power once, and confirm the TV shuts off and turns back on; if nothing happens, cycle through the next codes.

Start by powering up your Dynex TV and aiming the universal remote right at it. Hold down Setup until the top LED stays lit—about 3–5 seconds—then release it. The light should blink twice to tell you it’s ready. Type in 10171, then press Power once. If the TV turns off, you’re golden. Hit Power again to bring it back to life. Still nothing? Move on to 10463, 10180, 10096, or 10236.

How do I sync my Comcast remote to my TV?

Hold Xfinity and Mute together for 5 seconds until the LED turns green, then enter the code from the CodeFinder tool.

Grab your Comcast remote and press Xfinity and Mute at the same time for roughly 5 seconds. Watch the top LED—it should flip from red to green. Once it’s green, punch in the code you grabbed from the Xfinity CodeFinder tool. Test it by turning the TV on and off and adjusting the volume.

How do I sync my Xfinity remote to my TV volume?

Press and hold Xfinity and Info buttons for 5 seconds until the light turns green, then enter the on-screen pairing code.

Aim the Xfinity remote at the TV. Hold Xfinity and Info together for 5 seconds. Wait for the LED to shift from red to green, then follow the on-screen instructions to type the three-digit pairing code. Once it’s accepted, your remote should handle volume and mute without a hitch.

How do I program my Comcast remote to the receiver?

For XR11 remotes, hold Setup until the LED turns green, then enter 9-8-1 to factory reset.

If your Xfinity Voice Remote (model XR11) goes silent, a factory reset can often bring it back. Press and hold Setup until the LED changes from red to green—about 5–7 seconds—then let go. Type 9-8-1 to erase the remote’s memory and restore it to factory defaults. You’ll find this process laid out on the Xfinity Remote Support page.

Why won’t my Xfinity remote pair with my TV?

Press and hold Xfinity and Mute for 5 seconds until the light turns green, then enter the first 5-digit code for Dynex.

Make sure the TV is on. Press Xfinity and Mute together for about 5 seconds. When the LED flips from red to green, release the buttons and type the first 5-digit Dynex code. If the remote starts controlling the TV, you’re done. Still stuck? Reset the remote to factory settings using the steps above.

How do I pair my Xfinity XR15 remote with my TV?

Use the Xfinity TV Remote app to control your TV with voice commands.

Download the Xfinity TV Remote app to your phone. Open it, follow the on-screen setup, and pair it with your XR15 remote. The app lets you control your TV by voice and guides you through the pairing process step by step.

Can a Comcast remote be used as a universal remote?

Yes—most Comcast remotes can control TVs, soundbars, and receivers using the CodeFinder tool.

Comcast remotes—especially the XR2, XR5, XR11, and XR15 models—can double as universal remotes thanks to the CodeFinder tool. You can sync it to your TV, soundbar, or AV receiver by entering the right code or letting the remote search automatically. It’s handy when you lose the original remote or want one less gadget cluttering your coffee table.

How do I connect my Comcast remote to my soundbar?

Hold Xfinity and Mute for 5 seconds until the light turns green, then enter the soundbar’s code from the CodeFinder.

Point your Comcast remote at the soundbar. Press and hold Xfinity and Mute for 5 seconds until the LED turns green. Use the number pad to enter the soundbar’s code from the Xfinity CodeFinder. Test the volume and power buttons to make sure everything’s talking to each other.

How do I sync my soundbar with my TV remote?

Hold the TV remote’s Setup button until the light stays on, enter the soundbar’s 3-digit code, and press Power.

Turn on your soundbar and aim your TV remote at it. Press and hold Setup until the LED stays lit—about 3–5 seconds—then release it. Type the soundbar’s 3-digit code from your TV brand’s list, then press Power. If the soundbar powers on or off, the sync worked. Samsung and LG usually tuck a quick code list in the manual or on their support sites.