Use code 30548 for Magnavox TVs made after 2018; enter it via Setup → TV → Power → 30548 → OK.
Quick Fix Summary
Enter 30548 if your Magnavox was built after 2018. Hold Setup → TV → Power until the LED locks on, type the code, then hit OK. Aim the remote at the TV and test the Power button.
Yes—most universal remotes use IR signals that require the correct 3–5 digit code to control a Magnavox TV.
Yes—most universal remotes use IR signals that require the correct 3–5 digit code to control a Magnavox TV.
Universal remotes talk to your TV using infrared (IR) signals. Wrong code? Dead batteries? The TV won’t listen. Newer Magnavox sets use 3–5 digit codes, while older ones rely on legacy 4-digit codes like 0004 or 0060. The IR sensor sits behind the lower right bezel, so point your remote there.
Enter the correct 3–5 digit code via Setup → TV → Power → code → OK.
Enter the correct 3–5 digit code via Setup → TV → Power → code → OK.
- Check batteries: Swap in fresh CR2025 or CR2032 cells—weak ones flicker and drop signals.
- Reset the remote:
- Hold Setup for 3 seconds until the LED blinks twice.
- Enter 9-9-9 to wipe all codes.
- Enter TV code for Magnavox:
TV Model Year Primary Code Alternate Codes 2018–2026 30548 0004, 0060, 1004 2014–2017 0004 0186, 0251 Pre-2014 0060 0258, 1060 - Confirm code entry:
- Point the remote at the TV’s IR sensor (lower right bezel).
- Hold Setup → TV → Power until the LED stays on.
- Type the 3–5 digit code, then press OK.
- Press Power once; the TV should shut off.
Run a code search or try brand-specific codes if the programmed code fails.
Run a code search or try brand-specific codes if the programmed code fails.
- Try code search:
- Hold Setup → TV → Power until the LED locks on.
- Let go of the keys, then mash Power until the TV reacts.
- Press OK to lock in the first working code.
- Use brand-specific codes: One-For-All remotes often hide Magnavox under “Toshiba” legacy codes.
- Check IR path: Clear any junk in front of the sensor and keep the remote within 10 ft and 30° of the sensor. Fire up your phone camera to confirm the IR LED flashes purple when you press a button.
Replace batteries regularly, store the original remote, and keep the IR path clear.
Replace batteries regularly, store the original remote, and keep the IR path clear.
- Tape a spare CR2025 or CR2032 to the back of the remote for emergencies.
- Stash the TV’s original remote in a drawer—it holds the factory code if you ever need it.
- Label the universal remote with the saved code using a tiny sticker so you don’t reset it by accident.
- Keep soundbars and routers away from the TV’s IR sensor; they can block the signal.
Nine times out of ten, the problem’s dead batteries or a blank remote. Plug in 30548 for post-2018 Magnavox TVs and you’ll usually regain full control in under two minutes.
For authoritative code lists, refer to Remote Central, Universal-Remote.net, and RCA Support.
You can use your universal remote with almost anything connected to your TV.
You can use your universal remote with almost anything connected to your TV.
Your universal remote can control your Blu-ray, DVD, VCR, DVR, cable box, satellite, digital converter box, streaming devices, and more.
Turn on your TV, then press and hold the DEVICE and POWER buttons together.
Turn on your TV, then press and hold the DEVICE and POWER buttons together.
Turn on your TV or another device you want to control. Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button lights up, then release both buttons. Point the remote at the TV and press the Power button—wait two seconds to see if it responds.
Most universal remotes work with modern TVs, but it depends on the remote and TV model.
Most universal remotes work with modern TVs, but it depends on the remote and TV model.
In most cases, yes. But it really comes down to your remote’s make and model, plus your TV’s make and model. Generally, universal remotes play nice with TVs made in the last decade.
Element TVs typically use the code 1004.
Element TVs typically use the code 1004.
Element TVs usually respond to the 4-digit code 1004.
One-For-All remotes use brand-specific codes—check the manual or search online.
One-For-All remotes use brand-specific codes—check the manual or search online.
One-For-All remotes rely on brand-specific codes. Grab your manual or search online for the right code for your device.
Go to Settings > Equipment Control > Manage Equipment > TV > Infrared Options > Change IR Profile, then click “Find IR Profile.”
Go to Settings > Equipment Control > Manage Equipment > TV > Infrared Options > Change IR Profile, then click “Find IR Profile.”
- Head to Settings > Equipment Control > Manage Equipment > TV > Infrared Options > Change IR Profile.
- Click “Find IR Profile.”
Point your phone’s camera at the remote and press a button—if you see a purple flash, your TV is IR enabled.
Point your phone’s camera at the remote and press a button—if you see a purple flash, your TV is IR enabled.
Fire up your phone’s camera, point it at the remote, and press a button. If you see a purple flash, your remote’s sending IR signals, so your TV is IR enabled.
Use your TV’s stock remote to turn the set on or off—if it works, your IR port is fine.
Use your TV’s stock remote to turn the set on or off—if it works, your IR port is fine.
Grab your TV’s original remote. If it turns the TV on or off, your IR port is working. Make sure the TV’s powered and the remote has fresh batteries before testing.
On most Samsung TVs, the IR sensor is on the lower right side of the screen.
On most Samsung TVs, the IR sensor is on the lower right side of the screen.
Most Samsung TVs hide the IR sensor on the lower right side of the screen or in the lower middle.
A remote that won’t respond usually means low batteries or something blocking the signal.
A remote that won’t respond usually means low batteries or something blocking the signal.
If your remote’s dead in the water, check the batteries first. Make sure you’re pointing it at the TV, and clear any clutter or electronics that might block the signal.
Samsung removed IR blasters because they’re rarely used anymore.
Samsung removed IR blasters because they’re rarely used anymore.
Samsung ditched IR blasters because most people don’t use them anymore. Plus, rivals pack the same feature into budget phones.
No iPhones have built-in IR blasters, but you can buy a dongle to add the feature.
No iPhones have built-in IR blasters, but you can buy a dongle to add the feature.
iPhones don’t come with IR blasters, so they can’t control older, non-Wi-Fi TVs. If you really need the feature, grab an IR dongle that plugs into the Lightning port.
The Galaxy A10e doesn’t have an IR blaster, so it can’t act as a remote control.
The Galaxy A10e doesn’t have an IR blaster, so it can’t act as a remote control.
Nope. The Galaxy A10e lacks an IR blaster, so it can’t double as a remote control.
